This article is related to the CRUSHER 720 and Google's Find Hub app.

Once disabled, the CRUSHER 720 will stop reporting its location to the Find Hub network, and the owner will no longer receive location updates.

If you receive a message on your Android device indicating that a CRUSHER 720 has been detected nearby—and you are unfamiliar with the device—you can make the headset ring using the system notification. After locating the item, follow the steps below to disable it. Once disabled, the owner will no longer receive location updates, and the headset will stop triggering unknown tracker alerts.

Disable Using the Power Key

1. Double tap then on the third tap hold for 1 second (each tap you can hear the tone).
2. While holding 1 second on the third tap you will hear a confirmation sound (1-second-long press tone).
3. When you release the hold, the Find Hub network will be disabled.

How to re-enable a CRUSHER 720 on Find Hub

After disabling the Find Hub network, power off the headset and then power it back on.

To power off the headset:

• Long press 3 seconds on the power button. You can hear the prompt and the amber LED will blink 3 times.

To power it back on:

• Long press the power key for 1 second. (Blue LED will light up)