Thank you for your recent Skullcandy Gaming purchase. Below please find some simple instructions on setting up your new PLYR 2. Should you run into any trouble, know that our support team is here to help and can be reached at 888.MY.SKULL (697-5855), Monday - Friday from 7:00 a.m. - 7:00 p.m. MST.
*** NOTE: If the headset shutting off randomly try using the charging cable as the power cable and see if that resolves the issue. Cable 1 and 2 are the same cable just different lengths. The shortest one (number 1) is the power cable. The longest one (number 2) is the charging cable for the headset. Cable 3 is the Xbox live chat cable (this cable is only needed for xbox). Cable 4 is the piggyback RCA cable.
Make sure the Transmitter and headset are powered on.
Press and hold the power buttons on both the transmitter and headset for 2 seconds until the LEDs begin to flash white.
Once pairing is complete the power LEDs will stop flashing and turn solid white.
A solid amber light on the headset means the headset is either fully charged or is powered via USB
A rapid blinking amber light on the headset means the headset needs to be charged (less than 15% remaining).
A solid blinking amber light on the headset means the headset is charging.
PLYR 2 Setup on Mac (Audio/Chat)
First you want to make sure your Wireless GMX Transmitter's USB Power cables is plugged into your computer, and the GMX Mixer. (USB mini Transmitter, and the Regular USB to the port on your computer.) .
If your headset is plugged in appropriately, the Skullcandy logo on the front of the transmitter GMX should light up "White" when powered, and you should be able to select the device for use
Make Sure the headset and the GMX transmitter are paired together. This is done by simultaneously pressing the Skullcandy Logo on the transmitter, and the power button on the PLYR headsets right ear cup. You hold both of them down for 5 seconds, and when paired the Skullcandy Logo should flash, and the light on the headset will turn "White". Once the headset is paired , you can move to the other steps
Next make sure that the computer is defaulting to the "Skullcandy GMX Stereo Transmitter" as the input and the output device for audio. This can be set up through "System Preferences" Tab in the "Apple Menu"
On the Playback tab click on Skullcandy GMX Stereo Transmitter and click on Set Default
You want to go to the "Sound" section of the "System Preference" console.
Next make sure that the input is defaulted to the "Skullcandy GMX Stereo Transmitter:, and you should see the option to select it as the default device in this screen. If you cannot see "Skullcandy GMX Stereo Transmitter" as an option, chekc your USB cable to make sure it is properly connected.